Welcome
Welcome to kangertech

You are currently viewing our boards as a guest, which gives you limited access to view most discussions and access our other features. By joining our free community, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. In addition, registered members also see less advertisements. Registration is fast, simple, and absolutely free, so please, join our community today!

Ohms flashing

Ohms flashing

Postby paulyb » Wed Jan 04, 2017 8:03 am

I bought a Kbox Mini C about a month ago and for about a week it worked fine. Then it wouldn't work below about 25 watts. Under 25 watts the ohms would flash on and off 10 times at 60 ohms and it showed zero voltage. I put in a new coil and it started working at 15 watts. Then it quit working at 15 watts, but if I bumped it up to 25 watts for a couple of hours, it would start working again at 15 watts. Then it quit working at all at 15 watts, so I had to go to 17 watts and then 19, and now it won't work at all up to 28 watts. It keeps getting worse and worse. The ohms flashes off and on 10 times at 60 and it shows 0 volts when it doesn't work.
paulyb
 
Posts: 2
Joined: Wed Jan 04, 2017 7:18 am

Re: Ohms flashing

Postby kangertech » Wed Jan 04, 2017 8:21 am

What coil you use and what is the coil ohm?
kangertech
Site Admin
 
Posts: 2104
Joined: Mon Nov 17, 2014 2:28 pm

Re: Ohms flashing

Postby paulyb » Wed Jan 04, 2017 10:32 am

I use a Kangertech SSOCC replacement coil at 1.2 ohms
paulyb
 
Posts: 2
Joined: Wed Jan 04, 2017 7:18 am

Re: Ohms flashing

Postby kangertech » Wed Jan 04, 2017 4:39 pm

The 1.2ohm coil should set 10-15w,high wattage setting cannot work .
kangertech
Site Admin
 
Posts: 2104
Joined: Mon Nov 17, 2014 2:28 pm


Return to Battery

Who is online

Users browsing this forum: No registered users and 1 guest

suspicion-preferred