Welcome
Welcome to kangertech

You are currently viewing our boards as a guest, which gives you limited access to view most discussions and access our other features. By joining our free community, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. In addition, registered members also see less advertisements. Registration is fast, simple, and absolutely free, so please, join our community today!

kbox mod

kbox mod

Postby bass428 » Fri Mar 13, 2015 1:06 pm

Anybody else have problems with the kbox shorting out. Never even got to use mine
bass428
 
Posts: 1
Joined: Fri Mar 13, 2015 1:03 pm

Re: kbox mod

Postby kangertech » Wed Mar 25, 2015 2:12 pm

Please follow the below check list and find the cause:
Condition Analysis

1 Press the fire button Check atomizer open circuit
All light flash 3 times Check if the coil resistance
less than 0.4 Ohm

2 After install the cell Check if the cell reverse install
Click 5 times but power Check if the cell is empty
light no on Check if the cell poles any rusty
Recharge the cell and test again.

3 Press the button and no Check if the battery can output 20A
fire but battery power light
on

4 In case issue
a. check flash 3 times is it only flash 3 times then stop
is it continuous flash 3 times again
b. can 5 times speedy press can lock and unlock or not
c. if on check 8-40W all step wattage have issue or not.

In case srill have issue , please email to sccheung@szkanger.com
kangertech
Site Admin
 
Posts: 2212
Joined: Mon Nov 17, 2014 2:28 pm

Re: kbox mod

Postby DAEMONKINDER » Thu Apr 02, 2015 4:30 am

my kbox does the flashing lights and no fire .. at times it flashes up to 17 times and then lights go out .. then if i press again it may fire or not .. it is intermittent .
your instructions in the previous post are a little vague .. all i know is that the Kbox is having an issue but what the cause is i do not know ..
the battery cells are fine because they are all new and charged 100% .. and they all work fine in a standard mod
DAEMONKINDER
 
Posts: 1
Joined: Thu Apr 02, 2015 4:23 am

Re: kbox mod

Postby kangertech » Mon Apr 13, 2015 5:19 pm

DAEMONKINDER wrote:my kbox does the flashing lights and no fire .. at times it flashes up to 17 times and then lights go out .. then if i press again it may fire or not .. it is intermittent .
your instructions in the previous post are a little vague .. all i know is that the Kbox is having an issue but what the cause is i do not know ..
the battery cells are fine because they are all new and charged 100% .. and they all work fine in a standard mod


The flashing of 17 times means the battery cannot discharge properly, try to change another cell, make sure the cell can discharge 20A.
kangertech
Site Admin
 
Posts: 2212
Joined: Mon Nov 17, 2014 2:28 pm

Re: kbox mod

Postby nefariouspig » Mon Apr 20, 2015 3:06 am

my kbox was working perfectly for about a month then all of a sudden one morning it wouldn't fire. when i hold the button it just flashes 4 times then stays on. i have tried each watt setting and all the batteries i was using in it before and all my atty's/tanks and get the same result. why is this happening and what can i do to fix it?
nefariouspig
 
Posts: 1
Joined: Mon Apr 20, 2015 3:01 am

Re: kbox mod

Postby kangertech » Mon Apr 20, 2015 2:04 pm

It flash 3 to 4 times seem some portion of the 510 thread have been short, this may due to juice around there or the center pin issue, you need to bring it back to your direct vendor to check.
kangertech
Site Admin
 
Posts: 2212
Joined: Mon Nov 17, 2014 2:28 pm

Re: kbox mod

Postby Chad Asher » Tue Apr 21, 2015 2:23 am

This is fantastic news, I have gone through many different box mods, ego twists, ego mods. Everything but mech's (which I have been looking into) and I have truly fallen in love with my Kbox. It is the perfect device for me since I need more power but dont always have the time to build my own coils or meddle with mechs. I was afraid I had busted it after about a month and a half of use but it was just my cell. Thank you for the assistance and thank you for making such a quality device!
Chad Asher
 
Posts: 1
Joined: Tue Apr 21, 2015 2:18 am

Re: kbox mod

Postby Memphisvaper » Tue May 05, 2015 2:00 pm

I've had my KBox for about a month and it just suddenly stopped firing. When I press the firing button all lights illuminate normally but it doesn't fire. I have no blinking lights and I've tried all wattage levels and it does nothing. Anyone have any ideas?
Memphisvaper
 
Posts: 1
Joined: Tue May 05, 2015 1:55 pm

Re: kbox mod

Postby kangertech » Wed May 06, 2015 4:48 pm

I am sorry for your case.
I suggest you change another tank to fit with the kbox ,and confirm it is the problem of tank or the mod.
In case that the kbox can not fire ,i suggest you contact your dealer for helping
kangertech
Site Admin
 
Posts: 2212
Joined: Mon Nov 17, 2014 2:28 pm

Re: kbox mod

Postby mrwoo » Tue May 12, 2015 2:57 pm

I used Kbox about a month , then suddently when i click the fire button it only blink 4 times and not firing . i'm using 3 of my samsung battery and 2 subtank mini from kanger and 1 tank from smoke . the mod is not firing any of it . I already asked my vendor to repair it and they cant find the problem and they wont open my kbox .
why? they said once they open anything happend is on me like they know nothing . please I need help , I can't spend Rm 200 per month on mod only :(.if there any kbox specialist in malaysia let me know .
mrwoo
 
Posts: 1
Joined: Tue May 12, 2015 2:50 pm

Next

Return to Battery

Who is online

Users browsing this forum: No registered users and 2 guests

suspicion-preferred